style2

Contact Information

Room no. 611
Department of Civil Engineering
Bangladesh University of Engineering and Technology
Dhaka 1000
Bangladesh

Telephone: +880-2-8616833 Extn. 7944 (off), 7751 (res)
Fax: +880-2-9665639

Perpetual

continuing or enduring forever; everlasting lasting an indefinitely long time

Sustainable

capable of being supported or upheld as by having its weight borne from below pertaining to a system that maintains its own viability by using techniques that allow for continual reuse

Leadership

leadership help themselves and others to do the right things. they set direction, build an inspiring vision, and create something new. leadership is about mapping out where you need to go to "win" as a team or an organization; and it is dynamic, exciting, and inspiring.

+880-2-8616833 Extn. 7944 (off), 7751 (res)

Publication

Peer-reviewed journals

  1. Choudhury, M.S.I., Amin, A.F.M.S., Islam, M.M., Hasnat, A. (2016). Effect of confining pressure distribution on the dilation behavior in FRP-confined plain concrete columns using stone, brick and recycled aggregates, Construction and Building Materials, 102, 541-551.
    Permalink: http://dx.doi.org/10.1016/j.conbuildmat.2015.11.003
  2. Hasnat, A., Islam, M. M., & Amin, A. F. M. S. (2015). Enhancing the Debonding Strain Limit for CFRP-Strengthened RC Beams Using U-Clamps: Identification of Design Parameters. Journal of Composites for Construction, 04015039.
    Permalink: http://dx.doi.org/10.1061/(ASCE)CC.1943-5614.0000599
  3. Islam, M. M., Choudhury, M. S. I., & Amin, A.F.M.S. (2015). Dilation Effects in FRP-Confined Square Concrete Columns Using Stone, Brick, and Recycled Coarse Aggregates. Journal of Composites for Construction, 04015017.
    Permalink: http://dx.doi.org/10.1061/(ASCE)CC.1943-5614.0000574
  4. Hossain, M., Amin, A.F.M.S., & Kabir, M.N. (2015). Eight-chain and full-network models and their modified versions for rubber hyperelasticity: a comparative study. Journal of the Mechanical Behavior of Materials, 24(1-2), 11-24.
  5. Amin, A.F.M.S., Hasnat, A., Khan, A.H. & Ashiquzzaman, M. (2015). Residual cementing property in recycled fines and coarse aggregates: Occurrence and quantification, Journal of Materials in Civil Engineering [accepted for publication on 01 September 2015]
    Permalink: http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0001472
  6. Nguyen, D.A., Dang, J., Okui, Y., Amin, A.F.M.S., Okada, S., & Imai, T. (2015). An improved rheology model for the description of the rate-dependent cyclic behavior of high damping rubber bearings. Soil Dynamics and Earthquake Engineering, 77, 416-431.
  7. Amin, A. F. M. S., Bhuiyan, A. R., Hossain, T., & Okui, Y. (2014). Nonlinear Viscosity Law in Finite-Element Analysis of High Damping Rubber Bearings and Expansion Joints. Journal of Engineering Mechanics.
    Permalink: http://dx.doi.org/10.1061/(ASCE)EM.1943-7889.0000888
  8. Razzaq, M. K., Okui, Y., Bhuiyan, A. R., Amin, A., Mitamura, H., & Imai, T., (2012). Application of Rheology Modeling to Natural Rubber and Lead Rubber Bearings: A Simplified Model and Low Temperature Behavior. Structural Engineering/Earthquake Engineering, JSCE, 29(2), 40-55.
  9. Hossain, M. F., Molla, M. A. I., Masum, S. M., Rana, A. A., Amin, AFMS, Chowdhury, R.S., Sultana, S., & Karim, M.M., (2012). Chemical and Sedimentological Characterization of Moulvibazar Silica Deposit of Bangladesh as Standard Sand, International Journal of Basic & Applied Sciences, IJBAS-IJENS Vol:12 No:06, 170-176.
  10. Amin, A.F.M.S., Haque, M.M., Siddiqi, M.Z.R., Rahman, M.A., Islam, M.S., & Alam, M. K., (2012) Use of selected silica deposits of Bangladesh as standard sand in testing compressive strength of hydraulic cement mortars: A proposal for strength correlation, Journal of Civil Engineering, IEB, Journal of Civil Engineering (IEB), 40 (2), 181-202.
  11. Amin, A.F.M.S., Lion, A., Hofer, P., (2010). Effect of Temperature History on the Mechanical Behavior of a Filler-Reinforced NR/BR Blend: Literature Review and Critical Experiments, Journal of Applied Mathematics and Mechanics / Zeitschrift fur Angewandte Mathematik und Mechanik, 90(5), pp. 347-369.
  12. Amin, A.F.M.S., Lion, A., Sekita, S., Okui, Y., (2006a). Nonlinear dependence of viscosity in modeling the rate-dependent response of natural and high damping rubbers in compression and shear: Experimental identification and numerical verification, Int. J. Plast., 22(9), 1610-1657.
  13. Amin, A.F.M.S., Wiraguna, S.I., Bhuiyan, A.R., Okui, Y. (2006b). Hyperelasticity model for FE analysis of natural and high damping rubbers in compression and shear, J. Engrg. Mech., ASCE, 132(1), 54-64.
    Permalink: http://dx.doi.org/10.1061/(ASCE)0733-9399(2006)132:1(54)
  14. Amin, A.F.M.S., Alam, M.S., Okui, Y. (2003). Measurement of lateral deformation of natural and high damping rubbers in large deformation uniaxial tests, J. Testing Eval., ASTM, 31(6), 524-532.
  15. Amin, A.F.M.S., Alam, M.S. and Okui, Y. (2002). An improved hyperelasticity relation in modeling viscoelasticity response of natural and high damping rubbers in compression: experiments, parameter identification and numerical verification, Mechanics of Materials, 34, 75-95.
  16. Amin, A.F.M.S., Alam, M.S. and Okui, Y. (2001). Nonlinear Viscoelastic Response of Elastomers: Experiments, Parameter Identification and Numerical Simulation, Journal of Structural Engineering, JSCE, 47A, pp. 181-192.
  17. Ahmad, S. and Amin, A.F.M.S., (1998). Effect of Curing Conditions on Compressive Strength of Brick Aggregate Concrete, Journal of Civil Engineering, Institution of Engineers, Bangladesh, Vol. CE26, No.1, pp. 37-49.
Copyright saifulamin.info | All rights Reserved